LB-L Series In-Situ oxygen Laser Gas Analyzer
Principle of Operation :
Penganalisis gas laser seri LB-L menggunakan spektroskopi serapan dioda laser yang dapat disetel (TDLAS), realisasi pengukuran non kontak pada suhu tinggi, tekanan tinggi, debu tinggi, dan kondisi uji kasar lainnya. Laser selektif tinggi berdasarkan frekuensi, alat analisa memiliki kinerja anti interferensi yang baik. Dibandingkan dengan metode analisis tradisional, mengurangi sistem sampling yang kompleks, pemasangan yang fleksibel dan mudah digunakan, sangat mengurangi beban instalasi secara manual dan beban kerja saat pemeliharaan.
Applications :
- Iron and steel
- Metallurgy
- Refinery
- Petrochemical
- Pharmacy
- Incineration
Spesification:
| Measured gas | 02 |
| Method | Tunable Diode Laser Absorption Spectroscopy (TDLAS) |
| Range | 0-1%, 0-2%, 0-5%VOL (Customized) |
| Linearity | ± 1% of full scale |
| Display Resolution | 0.01%VOL |
| Response time | Less than 4S |
| Output signal | 4’20mA DC, Insulting output, maximum load 900ohm concentration (2 range), transmittance |
| Automatic diagnosis function | un-normal range overflow, transmittance, temperature and pressure, laser temperature etc |
| Calibration | Offline calibration |
| Power supply | 23.5-24.5V DC, used in the 100V AC environment, must Be Prepared the panel or universal remote power supply With display (URD), or universal power supply device (power 90-240VAC, 50/60Hz) |
| Power consumption | 120 W (24 VDC, 5A) |
| Exploison proof structure | Exd II CT6 certified |
| Monitoring gas conditions | Temp : less than 15000C, Pressure : les than 1 MPa |
| Warm up time | 60 minutes |
| Installation Environment |
|
| Ambient Temperature | Transmitting device : 16Kgs, Receiving device 5.5Kgs |
Butuh Solusi untuk Kebutuhan Anda?
Temukan produk, layanan, dan solusi instrumentasi yang sesuai dengan kebutuhan industri, laboratorium, dan monitoring lingkungan Anda.
Artikel Terkait
LB-L Series In-Situ oxygen Laser Gas Analyzer
Principle of Operation :
Penganalisis gas laser seri LB-L menggunakan spektroskopi serapan dioda laser yang dapat disetel (TDLAS), realisasi pengukuran non kontak pada suhu tinggi, tekanan tinggi, debu tinggi, dan kondisi uji kasar lainnya. Laser selektif tinggi berdasarkan frekuensi, alat analisa memiliki kinerja anti interferensi yang baik. Dibandingkan dengan metode analisis tradisional, mengurangi sistem sampling yang kompleks, pemasangan yang fleksibel dan mudah digunakan, sangat mengurangi beban instalasi secara manual dan beban kerja saat pemeliharaan.
Applications :
- Iron and steel
- Metallurgy
- Refinery
- Petrochemical
- Pharmacy
- Incineration
Spesification:
| Measured gas | 02 |
| Method | Tunable Diode Laser Absorption Spectroscopy (TDLAS) |
| Range | 0-1%, 0-2%, 0-5%VOL (Customized) |
| Linearity | ± 1% of full scale |
| Display Resolution | 0.01%VOL |
| Response time | Less than 4S |
| Output signal | 4’20mA DC, Insulting output, maximum load 900ohm concentration (2 range), transmittance |
| Automatic diagnosis function | un-normal range overflow, transmittance, temperature and pressure, laser temperature etc |
| Calibration | Offline calibration |
| Power supply | 23.5-24.5V DC, used in the 100V AC environment, must Be Prepared the panel or universal remote power supply With display (URD), or universal power supply device (power 90-240VAC, 50/60Hz) |
| Power consumption | 120 W (24 VDC, 5A) |
| Exploison proof structure | Exd II CT6 certified |
| Monitoring gas conditions | Temp : less than 15000C, Pressure : les than 1 MPa |
| Warm up time | 60 minutes |
| Installation Environment |
|
| Ambient Temperature | Transmitting device : 16Kgs, Receiving device 5.5Kgs |
