Portable Gas IR-GAS-600 Syngas Analyzer
Portable Gas IR-GAS-600 Syngas Analyzer mengadopsi pengukuran sensor gas yang diimpor menggunakan sensor elektrokimia oksigen, pengukuran hidrogen menggunakan TCD thermal conductivity sensor, metana dan karbon dioksida, karbon monoksida, yang kemudian diukur dengan menggunakan sensor gas NDIR non dispersif sensor infra merah (dipilih sesuai dengan kebutuhan pengguna).
Alat ini memotong koreksi interferensi berdasarkan masing-masing komponen pengukuran tunggal, yang memiliki akurasi tinggi, waktu respon yang singkat, arus yang rendah, dan karakteristik operasi sederhana.
Portable Gas IR-GAS-600 Syngas Analyzer cocok untuk oven coke, fasilitas manufaktur baja, produksi gas sintetis, insinerator dan pembangkit batubara, gasifikasi biomassa, dan banyak lagi.
[wptab name=’Fitur’]
[/wptab]
[wptab name=’Spesifikasi’]
| Measurement | CO, CO2, CH4, CnHm, O2, H2 ,BTU index (gas calorific value) |
| Calculation | High Heating Value or Low Heating Value in MJ/m3 or kcal/m3 |
| Technology | CO, CO2, CH4, CnHm : proprietary dual beam NDIR detectorsO2 : industrial electrochemical cell
H2 : proprietary thermal conductivity detector |
| Ranges | CO: 0-100%, CO2: 0-50%, CH4 : 0-10%, CnHm : 0-10%, O2: 0-25%, H2: 0-50%Other ranges customizable on request without price increase |
| Resolution | 0,01% |
| Accuracy | ≤ ± 1% FS |
| Statability | ≤ 1%FS/7d(zero drift),≤ 1%FS/7d(span drift), |
| Warm-up | 45min |
| Gas conditions at analyzer inlet | Flow:0.3L-1.0/min, internal gas sampling pump, external flow meter with needle valvePressure:0.1Mpa≤ inlet pressure≤ 0.2Mpa
Quality: No dust, moisture, tar (external safety filter and optional gas washing unit) |
| Operating conditions | Tamb : -5°C -50°C / Pamb : 86 to 108 kPa / RH : 0-90% non condensing |
| Response time (T90) | ≤ 10 sec |
| Communication interface | USB Port |
| Power supply | External 220 VAC-50Hz |
| Internal with battery and charger; Autonomy of > 4h with pump in operation | |
| Battery | 12.6V Li-battery,Capacity:10AH |
| Standby time: | about 12 hours |
| Dimensions and weight | Gas analyser :270 (L) x 215(W) x 316 (H) mm / ± 2.5kgs |
| Type of sampling tube | outer 6 , inner 4 |
[/wptab]
[end_wptabset]
Artikel Terkait
Portable Gas IR-GAS-600 Syngas Analyzer
Portable Gas IR-GAS-600 Syngas Analyzer mengadopsi pengukuran sensor gas yang diimpor menggunakan sensor elektrokimia oksigen, pengukuran hidrogen menggunakan TCD thermal conductivity sensor, metana dan karbon dioksida, karbon monoksida, yang kemudian diukur dengan menggunakan sensor gas NDIR non dispersif sensor infra merah (dipilih sesuai dengan kebutuhan pengguna).
Alat ini memotong koreksi interferensi berdasarkan masing-masing komponen pengukuran tunggal, yang memiliki akurasi tinggi, waktu respon yang singkat, arus yang rendah, dan karakteristik operasi sederhana.
Portable Gas IR-GAS-600 Syngas Analyzer cocok untuk oven coke, fasilitas manufaktur baja, produksi gas sintetis, insinerator dan pembangkit batubara, gasifikasi biomassa, dan banyak lagi.
[wptab name=’Fitur’]
[/wptab]
[wptab name=’Spesifikasi’]
| Measurement | CO, CO2, CH4, CnHm, O2, H2 ,BTU index (gas calorific value) |
| Calculation | High Heating Value or Low Heating Value in MJ/m3 or kcal/m3 |
| Technology | CO, CO2, CH4, CnHm : proprietary dual beam NDIR detectorsO2 : industrial electrochemical cell
H2 : proprietary thermal conductivity detector |
| Ranges | CO: 0-100%, CO2: 0-50%, CH4 : 0-10%, CnHm : 0-10%, O2: 0-25%, H2: 0-50%Other ranges customizable on request without price increase |
| Resolution | 0,01% |
| Accuracy | ≤ ± 1% FS |
| Statability | ≤ 1%FS/7d(zero drift),≤ 1%FS/7d(span drift), |
| Warm-up | 45min |
| Gas conditions at analyzer inlet | Flow:0.3L-1.0/min, internal gas sampling pump, external flow meter with needle valvePressure:0.1Mpa≤ inlet pressure≤ 0.2Mpa
Quality: No dust, moisture, tar (external safety filter and optional gas washing unit) |
| Operating conditions | Tamb : -5°C -50°C / Pamb : 86 to 108 kPa / RH : 0-90% non condensing |
| Response time (T90) | ≤ 10 sec |
| Communication interface | USB Port |
| Power supply | External 220 VAC-50Hz |
| Internal with battery and charger; Autonomy of > 4h with pump in operation | |
| Battery | 12.6V Li-battery,Capacity:10AH |
| Standby time: | about 12 hours |
| Dimensions and weight | Gas analyser :270 (L) x 215(W) x 316 (H) mm / ± 2.5kgs |
| Type of sampling tube | outer 6 , inner 4 |
[/wptab]
[end_wptabset]
